China FKM O Ring Manufacturers Factory Suppliers
-
EPDM Rubber Orings with NSF Certificates
EPDM is a copolymer of ethylene and propylene, and further a terpolymer of ethylene and propylene with a small amount of a third monomer (usually a diolefin) to permit vulcanization with...
-
Black Nitrile Rubber O-Rings are widely used sealing components designed for hydraulic systems, pneumatic equipment, automotive applications, pumps, valves, and industrial machinery. Manufactured...
-
An o-ring is a round, mechanical gasket designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
-
WRAS Approved EPDM O-rings are high-quality rubber sealing rings specially designed for drinking water and potable water applications.
-
WHITE SILICONE: Machinery Rubber Parts Elasticity rubber oil seal ring oil resistant VMQ silicone rubber Sealing ring
-
O-rings are the most common mechanical design for seals because of their low cost, simplicity of manufacture, reliable function, and simple installation requirements. O-rings are subjected to...
-
Nitrile Rubber is made from the copolymerization of acrylonitrile and butadiene. The content of acrylonitrile is 18%~50%. The higher the content of acrylonitrile, the better the resistance to...
-
The performance of EPDM o-rings is good sealing, heat resistance, cold resistance, chemical resistance, ozone resistance, hydraulic and pneumatic resistance, etc. Using for mechanical seals,...
-
The unvulcanized O-ring compound is a viscous fluid at high temperature and pressure, and at the stage of molding and vulcanization, the compound quickly fills the mold cavity, and the excess part...
-
Ethylene propylene rubber is composed of ethylene and propylene copolymerization and the main chain does not have a double chain. Therefore, it has excellent heat resistance, aging resistance,...
-
EPDM is a copolymer of ethylene and propylene, and further a terpolymer of ethylene and propylene with a small amount of a third monomer (usually a diolefin) to permit vulcanization with...
-
Metal Detectable O-Rings are an excellent choice for customers focused on food safety programs, audit readiness, and recall prevention, delivering dependable oil resistance and sealing performance...
Parker Fluorocarbon (FKM) O-Ring Compound Numbering System: Parker has two types of nomenclature used to reference Fluorocarbon (FKM) products. V Polymer Code (Single Letter) 0986 Sequence Number...
FKM O-Ring The classification of FKM is based upon the content of fluorine or their mechanism of crosslinking, as well as their chemical composition. Resistance to chemicals and heat is an...
Fluoroelastomer O-Ring Cord Stock This cord stock is made of FDA-listed material for use with food and beverage. It resists citric acid, diluted salt solutions, glycerin, and sodium...
Fluorocarbon (FKM) O-Rings Fluorocarbon (FKM) has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics and many organic...
FKM (or Fluorocarbon) works for almost every o-ring application. Contact Rocket Seals, Inc. today to request a quote! Go to Navigation Go to ... Available Materials for Metric O-Rings.pdf, O-Ring...









