Extruded Rubber Seals

Product Details

Technical Properties (Summary)

Material: Nitrile

Colour: Black

Density (specific gravity): 1.3 g/cm³

Shore Hardness: 70 ± 5 Shore A

Tensile Strength 12 N³

Elongation at Break: 300%

Min. Temperature: -20°C

Max. Temperature: +80°C

Compression set: 25%

how to choose

Notes for maintenance users When purchasing seals for maintenance, most users will buy according to the size and color of the sample, which will only increase the difficulty of purchasing, and may not be able to select the right product. The following procedures are recommended to improve the accuracy of purchasing seals:

1. Movement direction - first determine the movement direction of the location of the seal, such as reciprocating, rotating, spiral or fixed.

2. Sealing focus - such as determining the active point is the tie rod seal on the inner diameter or the active point is the piston seal on the outer diameter, etc.

3. Temperature class - Refer to the original machine operating instructions or evaluate the working temperature according to the actual working environment to determine the required materials. A description of temperature ratings can be found in the Production User Notes below.

4. Pressure level - Check the relevant data from the original mechanical operating instructions, or infer the working pressure level by observing the hardness and structure of the original seal. For the description of the pressure level, please refer to the following precautions for production users.

5. Size - Most users will choose the old samples that have been used, but the original size of the seal will be greatly affected by factors such as temperature, pressure and wear after a period of use, so the sample selection can only be used as a reference. , a better method is to measure the size of the metal groove where the seal is located, and the accuracy will be higher.

Our advantage

1. Compound from world class suppliers, NBR, EPDM, VITON (FKM), HNBR, Silicone,etc material and PANTONE code available, hardness from 30 to 95 Shore A. Imported compound from 3M,DuPont, Bayer, Daikin and Dow Corning,etc.

2. Pressed by mold vulcanization, ID from 0.5mm to 1000mm and C/S from 0.5mm to 20mm by mold Vulcanization, ID from 3mm to 20mm and C/S from 500mm to 6000mm by Section Vulcanization.

3. AS, JIS, BS,DIN,Metric and customize size available.

4. In house tool making and free of tooling charge for standard rubber ring, the mold line can be 45° and 180°.

5. RoHs / Reach / NORSOKM 710 certificate.

6. Strict material traceability in ERP and barcode system.

7. Big stock, mini MOQ acceptable

Hot Tags: extruded rubber seals, suppliers, manufacturers, factory, customized, quotation